Skydiving Wind Tunnel (Skydiving) - Voronezh City, Russia
The mobile aerodynamic facility Tornado - V is designed for free fall simulation.
The mobile aerodynamic facility Tornado-V is based on a downstream principle. A discharger (propeller) is placed below the function area. To provide an even stream and reduce the noise a six-blade low-noise propeller and a multistage stream leveling system are used. The function area is separated at the bottom by a steel net, and around the perimeter it is secured by an air-inflated mat and safety net that provide the necessary safety for training. The propeller is driven by a straight mechanic drive. As a power unit a powerful diesel engine is used. The facility is mounted on a truck semitrailer. It can be easily transported by a truck tractor. The facility is restored to service within 24 working hours without any crane lift. An external power source (380 V, 7,5 KWt) is required to provide normal service of the Tornado-V . The facility should be placed on a hard surface area.
The mobile aerodynamic facility Tornado-V is designed for free fall simulation. Perfect for skydiver training or for those who would like to give skydiving a go without jumping out of a plane.
One of the World's first portable wind tunells. Remember a skydive form 12,000ft only gives you approx 40 second sof freefall. So 2.5 minutes in our wind tunnel is a long time. Whether you want to practive your freeflying or are new to the sport of skydiving and would lije to practice slightly closer to the ground then come anf visit us here in Russia.
The mobile aerodynamic facility Tornado-V is based on a downstream principle. A discharger (propeller) is placed below the function area. To provide an even stream and reduce the noise a six-blade low-noise propeller and a multistage stream leveling system are used. The function area is separated at the bottom by a steel net, and around the perimeter it is secured by an air-inflated mat and safety net that provide the necessary safety for training

0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<<